Astar HT-3300 Especificações descarregar pdf (Página 44)

Reference Manual

00809-0100-4811, Rev DA

Section 3: Installation

January 2015

Installation

Rigid twin lead

The spacers are put closer together at the probe end. The maximum amount that can be cut

away is related to the ordering length L.

To cut a Rigid Twin Lead probe, do the following:

1. Cut the rods to the desired length:

 You may cut up to 19.7 in.

(500 mm) from the probe end for

probe length (L) above 46.5 in.

(1180 mm).

 For probe length

20.5 to 46.5 in. (520 to

1180 mm) the minimium length

is 20.5 in. (520 mm).

 For probe length 15.7 to 20.5 in.

(400 to 520 mm) the minimium

length is 15.7 in. (400 mm).

2. Update the transmitter configuration

to the new probe length, see “Probe

length” on page 70.

Max. shortening length:

19.7 in. / 500 mm

L > 46.5 in. (1180 mm)

20.5 in. < L < 46.5 in.

Minimum probe length

20.5 in. / 520 mm

(520 mm < L < 1180 mm)

Minimum probe length

15.7 in. / 400 mm

15.7 in. < L < 20.5 in.

(400 mm < L < 520 mm)

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 223 224

Sem comentários

Astar HT-3300 Especificações Página 44